Description
M14x1.4 Screw in wheel stud with 28.5mm/9.5mm split; 38mm overall length.
Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.
It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
